Safe operation covers flammable media, heating and chemicals, with the correct equipment and waste handling.
Flammable media
Solvents, hydrocarbon media and alcohol are flammable and require sealed, explosion-proof or vacuum equipment with inerting and recovery, not open heated machines.
Ignition sources are controlled.
- Sealed or explosion-proof equipment
- Inerting
- Vapour and recovery
Heating and chemicals
Low-level protection prevents dry heating, insulated lids and tanks reduce contact risk, and chemistry is handled at the recommended concentration.
Safety data and ventilation are reviewed before use.
- Low-level protection
- Insulated equipment
- Chemical handling
Waste and emissions
Spent chemistry, oil, sludge and rinse water are handled through the correct local route, and solvent recovery and counterflow rinsing reduce the volume.
Compliance is confirmed for the site.
Operator training
Operators are trained on loading, chemistry, controls and safety devices, and the maintenance schedule is documented.
Safety devices should never be bypassed.
Quick Answers
Frequently asked questions
Yes, with matched equipment, controlled chemistry and heating, and the required handling for flammable media.
In sealed, explosion-proof or vacuum systems with inerting and recovery, never in an open heated machine.
Through the correct local route for chemistry, oil and rinse water, with recovery and filtration reducing the volume.
