Benchtop Cleaners
Dual-Frequency / Multi-Frequency Benchtop Ultrasonic Cleaner
A 6.5-45 L benchtop range with two selectable, full-power ultrasonic frequency modes for coarse and fine cleaning in one bath.
View configuration
LENJEX Industrial Cleaning
Optics & Lenses Ultrasonic Cleaning
Gentle ultrasonic cleaning removes polishing compound, particles and fingerprints from optical components without scratching coated surfaces.
Why Ultrasonic
Ultrasonic cleaning for Optics & Lenses
Optical components carry polishing compound, fine particles, pitch and fingerprints after grinding, polishing and handling. Gentle, high-frequency ultrasonic cleaning reaches curved surfaces and edges without the contact of manual wiping, which can scratch delicate coatings.
A dual-frequency cleaner or laboratory cleaner with sweep and degas is commonly used, with neutral or compatible chemistry. The work is related to cleanroom precision cleaning and semiconductor parts cleaning.
Coating compatibility and frequency must be validated with representative components before production.
- Removes polishing compound and fine particles
- Gentle, non-contact cleaning for coated surfaces
- Higher frequencies protect delicate optics
- Sweep and degas for even cavitation
- Repeatable cleaning for precision production
Typical Workpieces
Parts in this application
- Lenses and prisms
- Optical windows and mirrors
- Filter and coated components
- Camera and instrument optics
- Lens assemblies and mounts
- Small glass optical parts
Contamination
Soils to evaluate
- Polishing and lapping compound
- Pitch and wax residues
- Fine particles and dust
- Fingerprints and handling oils
- Cleaning and coating residues
Cleanliness Target
Define clean before choosing equipment
Acceptance is based on visual or magnified inspection for particles, haze, smears and coating integrity.
Drying must be streak-free and appropriate for coated surfaces.
Recommended Sequence
A process route for evaluation
The final sequence depends on soil loading, material, rinse quality and drying behavior.
- Step 1Validate coating compatibility and frequency
- Step 2Gentle ultrasonic wash to remove polish and particles
- Step 3Careful rinse stages
- Step 4Streak-free drying and controlled handling
- VerifyInspect for haze, particles and coating condition
Recommended Equipment
Systems to compare
The final specification follows process testing and production analysis.
Benchtop & Laboratory Ultrasonic Cleaners
Laboratory Ultrasonic Cleaner with Degas & Sweep
Scientific lab ultrasonic bath with degas, sweep and precise control
View configuration
Benchtop & Laboratory Ultrasonic Cleaners
Compact Benchtop Ultrasonic Cleaner Series (2-30 L)
Small tabletop ultrasonic cleaners from 2 to 30 litres
View configurationProcess Controls
Control the variables that change the cleaning result
Confirm the part, soil, loading and final handling before fixing equipment settings.
Control 01
Material and geometry
Record surfaces, cavities and features that can trap air or liquid.
Control 02
Soil condition
Test the heaviest representative contamination, not an ideal sample.
Control 03
Basket loading
Keep acoustic access and part spacing consistent with production.
Control 04
Rinse and drying
Match downstream handling to residue and corrosion risks.
System Selection
Match the cleaning route to production flow
Stage count and automation follow the validated process and required output.
Batch
Single-tank route
Compare for focused washing where rinsing and drying are managed separately.
Multi-stage
Wash, rinse and dry
Add controlled stages when carryover and final condition matter.
Automatic
Repeatable transfer
Evaluate automation when output, handling or recipe control requires it.
Acceptance
Define how the cleaned part will be checked
Use the same practical inspection method for trial samples and production parts.
- Agree the surface or residue limit
- Check hidden and difficult features
- Record rinse, drying and handling conditions
- Compare results before the next operation
Representative Trial
Confirm the process with real parts and loads
Trial evidence should cover normal production and the most difficult expected condition.
- DescribePart, material and contamination.
- LoadUse realistic spacing and orientation.
- TestRecord chemistry, time and temperature.
- VerifyInspect with the agreed method.
Application Questions
Planning the cleaning study
Include normal production parts and the most difficult expected geometry or contamination so the process is not based on an easy sample.
Provide part dimensions, material, soil, cleanliness target, parts per load, required output and available utilities.
It can if the frequency or chemistry is too aggressive. LENJEX validates coated components with representative parts to confirm gentle, non-damaging cleaning.
Higher, gentler frequencies are generally used for optical components, with sweep and degas to ensure even cavitation.
Through controlled rinsing, compatible chemistry and appropriate drying, matched to the coating and component geometry.
Related Applications
Explore adjacent workpieces
Industrial Application
Semiconductor Parts & Fixtures Ultrasonic Cleaning
Gentle, controlled cleaning of semiconductor parts, carriers and tooling, where fine particles and surface integrity are critical.
View cleaning approach
Industrial Application
Glass & Bottles Ultrasonic Cleaning
Cleans glass components, vials, bottles and small containers, including interiors and narrow necks, without scratching.
View cleaning approach
Industrial Application
Precision Components Cleaning
Precision cleaning is controlled by particle size, surface sensitivity, rinse quality, bath condition and handling after the wash.
View cleaning approach