Heated batch tanks and special-process machines for focused industrial cleaning tasks.
Move the pointer over the main image to inspect details.
Industrial Single-Tank & Special Cleaners
LJ-G Series Ultrasonic Cleaner with Insulation Cover
Heated, energy-saving degreasing with an insulated cover
The LJ-G series adds a double-layer thermally insulated cover to the industrial single-tank platform. The cover retains heat, contains hot vapour, damps operating noise and helps protect operators from splashes during heated cleaning.
Long heated cycles, heavy grease, wax, lapping paste and carbonized oil, especially where heat loss, vapour and operator comfort must be controlled.
Review the construction, controls and process options available for this equipment.
01
LJ-G Series
Ultrasonic Cleaner with Insulation Cover
01
Insulated sealed cover
Reduces heat loss and helps maintain a stable bath temperature.
02
Vapour containment
Reduces detergent mist, odour and humidity around the cleaning station.
03
Acoustic damping
The insulated cover reduces audible cavitation noise for nearby operators.
04
Gas-strut opening
Two struts assist one-handed opening and hold the cover open without a prop rod.
05
Adjustable power and sweep
The generator provides auto tracking, sweep, soft start and 20-100% power control.
06
Level interlock
Low liquid level cuts the heater to prevent dry operation.
Model
Ultrasonic Power
Heating Power
Frequency
Inner Tank (mm)
Volume
LJ-2400G
2400 W
5 kW
28 KHz
900 x 500 x 400
180 L
LJ-3800G
3800 W
8 kW
28 KHz
1100 x 600 x 450
297 L
LJ-5200G
5200 W
10 kW
28 KHz
1300 x 700 x 500
455 L
Power supply: 380 V / 50 Hz three-phase. Volume, frequency, voltage and cover actuation can be customized for the application.
Applications
Typical applications
Review common workpieces, contamination types and process uses for this equipment.
01
Typical Applications
For heated degreasing, mold maintenance and long-duration industrial cleaning.
01
Mold and die maintenance
02
Heavy machining and stamping degreasing
03
Bearing and gear cleaning
04
Hydraulic and engine components
05
Investment-wax removal in foundries
06
Long-duration heated cleaning processes
Configuration Options
Configure the system for your process
Tank dimensions, utilities, automation and process settings are finalized around the application requirements.
Manual gas-strut or pneumatic cover actuation
Circulation filtration and bag filter
Surface oil skimmer
Basket lift or tilting basket
SUS316 wetted parts
Exhaust or condensation connection
Model range
LJ-2400G / LJ-3800G / LJ-5200G
Ultrasonic frequency
28 KHz standard; 20 / 40 / 60 / 80 KHz optional
Capacity or line basis
180 / 297 / 455 L
Ultrasonic power
2400 / 3800 / 5200 W
Construction
SUS304 tank with insulated stainless cover
Product Questions
Before selecting this equipment
Yes. Tank dimensions, basket loading, ultrasonic frequency, power, heating, filtration, handling and controls are reviewed for the part and process. Long heated cycles, heavy grease, wax, lapping paste and carbonized oil, especially where heat loss, vapour and operator comfort must be controlled.
Send part drawings or dimensions, material, maximum weight, contamination, required cleanliness, parts per load, daily output and available utilities.
Yes. Representative parts can be used to evaluate chemistry, cycle conditions, loading and inspection criteria before the final configuration is confirmed.
Related Equipment
Compare the same product family
Review adjacent configurations before fixing the cleaning process and handling method.
