Benchtop & Laboratory Ultrasonic Cleaners
Laboratory Ultrasonic Cleaner with Degas & Sweep
Scientific lab ultrasonic bath with degas, sweep and precise control
View configuration
LENJEX Solution Center
Cleanroom Precision Cleaning
Controlled, high-frequency cleaning for precision parts in clean environments, with particle limits and validated handling.
Overview
Precision cleaning requirements
Particle limits and validated cycles.
Precision and cleanroom work removes fine particles and residues to defined limits, with controlled energy, high frequency, sweep and degas and careful handling to avoid recontamination. The process is documented and validated for repeatable results.
The laboratory ultrasonic cleaner and multi-frequency cleaner support these tasks, often in a clean-rinse-dry line.
Process Considerations
Precision decisions
Particle control and validation.
Acceptance is a counted or gravimetric particle limit and residue check.
- Particle counts
- Gravimetric inspection
- Residue checks
Gentle, higher frequencies and sweep protect sensitive surfaces.
- Sweep and degas
- Higher frequency
- Controlled energy
Rinse quality and filtration determine the final particle level.
- Filtered rinse
- Water quality
- Multi-stage rinse
Drying and handling prevent recontamination in the controlled environment.
- Controlled drying
- Clean handling
- Documented cycles
Recommended Route
A precision route
Validated and documented.
- DegasDegas and select a high frequency
- WashGentle ultrasonic wash
- RinseFiltered multi-stage rinse
- DryControlled drying
- VerifyVerify particle limits
Related Systems
Equipment for precision cleaning
Controlled and validated.
Benchtop Cleaners
Dual-Frequency / Multi-Frequency Benchtop Ultrasonic Cleaner
A 6.5-45 L benchtop range with two selectable, full-power ultrasonic frequency modes for coarse and fine cleaning in one bath.
View configuration
Multi-Tank & Automatic Cleaning Systems
Clean-Rinse-Dry Multi-Stage Ultrasonic System
Compact multi-stage ultrasonic wash, rinse and drying system
View configurationSolution Questions
Planning the application
It is a controlled, validated process that removes fine particles and residues to defined limits, often in a controlled environment with sweep and degas.
Gentle, higher frequencies are typically used, with sweep and degas to ensure even cavitation and protect surfaces.
Through filtered rinsing, controlled drying and clean handling in the controlled environment, with documented cycles.
Related Solutions
Explore related cleaning problems
Cleaning Solution
Precision Cleanliness Control
A part may look clean while fine particles, ionic residue or light films remain. Precision cleaning needs a measurable target and controlled final stages.
View solution
Cleaning Solution
Flux & Rosin Removal
Removes flux, rosin and ionic residues from soldered circuit boards with controlled frequency and compatible chemistry.
View solution
Cleaning Solution
Rinsing & Drying Solutions
Rinsing removes detergent and particles, and drying prevents water marks and corrosion, especially in cavities and blind holes.
View solution